Air Conditioning Design Chester

Air Conditioning Design in Chester

Chester's city centre includes timber-framed Rows buildings and a high concentration of listed properties, a very different installation environment to the inter-war suburbs further out toward Blacon and Upton. Design starts with a heat-load calculation for each room, accounting for floor area, glazing, insulation and occupancy rather than a fixed BTU-per-square-metre rule of thumb. Getting this wrong in either direction causes real problems: an oversized system short-cycles and never dehumidifies properly, while an undersized one runs constantly without reaching the target temperature.

Much of central Chester sits within a conservation area, and listed building consent is often required before an outdoor condenser can be fixed to a historic elevation, which we check before quoting rather than after.

What design includes

• Room-by-room heat-load calculation, not a fixed BTU-per-square-metre rule
• Indoor and outdoor unit positioning drawn up before any equipment is ordered
• Refrigerant pipe run and cable route planning
• Zoning design for projects covering more than one room
• Condensate drainage route planning
• Equipment specification matched to the calculated load, not the next size up

Built for Chester properties

Chester's historic street layout, with restricted vehicle access around the city walls and Rows, can limit scaffold or van access for city-centre properties in a way that does not affect the surrounding suburbs. Chester's inland position, away from the coastal moderating effect of the Mersey and Dee estuaries, means it can see slightly higher peak summer temperatures than Liverpool or the Wirral coast.

Other services in Chester

Air Conditioning Installation Chester, Air Conditioning Repairs Chester, Air Conditioning Servicing Chester, Commercial Air Conditioning Chester, Domestic Air Conditioning Chester, HVAC Chester and Ventilation Chester.